Refine search

Up Cut End Mills

Up cut end mills are great for all standard milling and material removal. These bits pull the wood chips up and away from the tool path which helps prevent tool breakage and extends the life of the bit. If a particular finish is required for your project, use a down cut or compression cut end mill for the final pass.

Our selection includes many cutting diameter and length combinations. Choose a bit by finding the largest cutting diameter and shortest cutting length that your router and project can accommodate.

Always opt for the largest cutting diameter as this will help achieve the smoothest finish.

Yonico solid carbide end mills are manufactured from the highest quality micro grain C3 solid carbide and will last for hours of use and maintain its sharpness throughout. These bits also carry a limited lifetime warranty and satisfaction guarantee.

31261-SC
$39.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/2"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 1/2"
  • Overall Length: 3"
  • Flutes: 2
In stock

31262-SC
$39.95  
28°

Bit is made up of 100% Solid Carbiide.

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/2"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 1/2"
  • Overall Length: 3"
  • Flutes: 2
In stock

31260-SC
$39.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 7/16"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 1/2"
  • Overall Length: 3"
  • Flutes: 2
In stock

31251-SC
$34.95  
28°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/2"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 1/2"
  • Overall Length: 3"
  • Flutes: 2
In stock

31250-SC
$24.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 3/8"
  • Cutting Height: 1"
  • Shank Diameter: 3/8"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

35350-SC
$24.95  
19°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 3/8"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 3/8"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

31350-SC
$24.95  
30°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 3/8"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 3/8"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

31340-SC
$19.95  
30°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 5/16"
  • Cutting Height: 1"
  • Shank Diameter: 5/16"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

31240-SC
$16.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 5/16"
  • Cutting Height: 1"
  • Shank Diameter: 5/16"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

31212-SC
$14.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 3/16"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 2
In stock

31214-SC
$14.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/4"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

31010-SC
$14.95  

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/4"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

31213-SC
$14.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 7/32"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/4"
  • Flutes: 2
In stock

31210-SC
$14.95  
33°

Best used For: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 2
In stock

31211-SC
$14.95  
33°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 5/32"
  • Cutting Height: 5/8"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

31215-SC
$14.95  
28°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/4"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

31311-SC
$14.95  
27.5°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 5/32"
  • Cutting Height: 5/8"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

31310-SC
$14.95  
27.5°

Best used For: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

31313-SC
$14.95  
27.5°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 7/32"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/4"
  • Flutes: 3
In stock

31312-SC
$14.95  
27.5°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 3/16"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

35314-SC
$14.95  

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/4"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

35210-SC
$14.95  

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 2
In stock

31314-SC
$14.95  
27.5°

Best used for: Standard milling, dadoing, and boring.

  • Cutting Diameter: 1/4"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

35212-SC
$14.95  
21°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 3/16"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 2
In stock

35310-SC
$14.95  
20°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

31011-SC
$14.95  
18°

Best used for: Aluminum

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 1
In stock

31413-SC
$14.95  
This ZRN coated endmill has a 1/8" cutting diameter x 1-1/4" cutting length. The overall length is 2-1/2" with a 1/4" shank.
In stock