Warning: Make sure the router bit is properly fastened and tightened in the router’s collet and the bit can rotate freely without any obstructions.
Instructions: Slowly dial up the RPMs on your router to the recommended maximum. Then, dial back if needed to find the “sweet spot”. The sweet spot is the speed at which the least resonant vibration is present. If the sweet spot cannot be achieved within 5,000 RPMs of the max, check the collet for residue or other debris and start over.
Download Router Bit RPM Chart
|
Bit Diameter (Inches)
|
Max RPM
|
Min RPM
|
|---|---|---|
|
1
|
24,000
|
19,000
|
|
1.1
|
24,000
|
19,000
|
|
1.2
|
24,000
|
19,000
|
|
1.3
|
24,000
|
19,000
|
|
1.4
|
24,000
|
19,000
|
|
1.5
|
24,000
|
19,000
|
|
1.6
|
22,500
|
17,500
|
|
1.7
|
21,100
|
16,100
|
|
1.8
|
20,000
|
15,000
|
|
1.9
|
18,900
|
13,900
|
|
2
|
18,000
|
13,000
|
|
2.1
|
17,100
|
12,100
|
|
2.2
|
16,300
|
11,300
|
|
2.3
|
15,600
|
10,600
|
|
2.4
|
15,000
|
10,000
|
|
2.5
|
14,400
|
9,400
|
|
2.6
|
13,800
|
8,800
|
|
2.7
|
13,300
|
8,300
|
|
2.8
|
12,800
|
7,800
|
|
2.9
|
12,400
|
7,400
|
|
3
|
12,000
|
7,000
|
|
3.1
|
11,600
|
6,600
|
|
3.2
|
11,200
|
6,200
|
|
3.3
|
10,900
|
5,900
|
|
3.4
|
10,500
|
5,500
|
|
3.5
|
10,200
|
5,200
|
Great value - double tongue and groove V-notch router bit set! The Standard Tongue & Groove Router Bits will cut perfectly fitted tongue and groove joints ideal for wood flooring, wainscot paneling and shaker style panel doors. Use with 3/4" stock. Highest quality, 3 wing carbide cutters with premium enclosed ball bearings. The Tongue and Groove V-notch Router Bit set will cut perfectly fitted v-groove (tongue & groove) joints ideal for flooring and wainscot paneling. Use with 5/8" – 1-1/8" stock. 2 flute carbide cutters with premium enclosed ball bearings. Tongue & groove joints give extra gluing surface for extra-strong joints. Separate tongue and groove bits eliminate reassembly for each cut. Set comes in a solid wood storage case. Shanks are 1/2".
Bit Specs
General Info
You might also like
