Refine search

Down Cut End Mills

Down cut CNC end mills are great for dado, pocket and inlay work as well as the final pass on most projects. These bits are especially useful when routing material such as melamine and plywood. Down cut spiral bits are designed to produce perfectly clean edges on the top face of the work piece but since the bit’s geometry causes the wood chips to travel in a downward direction, which will cause the tool path to be obstructed, it should only be used in applications where the desired finish is required.

Our selection includes many cutting diameter and length combinations. Choose a bit by finding the largest cutting diameter and shortest cutting length that your router and project can accommodate.

Always opt for the largest cutting diameter as this will help achieve the smoothest finish.

Yonico solid carbide end mills are manufactured from the highest quality micro grain C3 solid carbide and will last for hours of use and maintain its sharpness throughout. These bits also carry a limited lifetime warranty and satisfaction guarantee.

32240-SC
$39.95  
28°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 1/2"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 1/2"
  • Overall Length: 3"
  • Flutes: 2
In stock

36261-SC
$39.95  
24°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/2"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 1/2"
  • Overall Length: 3"
  • Flutes: 2
In stock

32230-SC
$24.95  
28°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 3/8"
  • Cutting Height: 1"
  • Shank Diameter: 3/8"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

32350-SC
$24.95  
33°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 3/8"
  • Cutting Height: 1-1/4"
  • Shank Diameter: 3/8"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

32340-SC
$19.95  
31°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 5/16"
  • Cutting Height: 1"
  • Shank Diameter: 5/16"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

32010-SC
$17.95  

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/4"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 3"
  • Flutes: 2
In stock

32220-SC
$16.95  
28°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 5/16"
  • Cutting Height: 13/16"
  • Shank Diameter: 5/16"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

32210-SC
$14.95  
30°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 2
In stock

32310-SC
$14.95  
25°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

32311-SC
$14.95  
25°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 1/4"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

36314-SC
$14.95  

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/4"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

32212-SC
$14.95  
28°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 1/4"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 2
In stock

32314-SC
$14.95  
28°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 7/32"
  • Cutting Height: 1"
  • Shank Diameter: 1/4"
  • Overall Length: 2-1/2"
  • Flutes: 3
In stock

32313-SC
$14.95  
29°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 3/16"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

32312-SC
$14.95  
30°

Best used for: Laminate or veneer-finish plunging and dadoing.

  • Cutting Diameter: 5/32"
  • Cutting Height: 5/8"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

36212-SC
$14.95  
20°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 3/16"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 2
In stock

36312-SC
$14.95  
20°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 3/16"
  • Cutting Height: 3/4"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock

36310-SC
$14.95  
25°

Best for achieving smooth finish on hard plastics.

  • Cutting Diameter: 1/8"
  • Cutting Height: 1/2"
  • Shank Diameter: 1/4"
  • Overall Length: 2"
  • Flutes: 3
In stock