Worldwide Shipping
great rates!
FAST FREE SHIPPING
within the 48 states

Refine search

Crown & Cornice Molding

16249
$49.95  
The Yonico 16249 reversible crown molding Router bit set can create 3 different crown moldings using your choice of bit combinations. Choose one profile for the bottom of the crown then flip the stock and repeat or swap the bit to create a more elaborate profile. Fence depth adjustments are not necessary as both bits have the same top edge width. (Minor sanding might be required.) Any combination of profiles you choose can create a crown greater than 6" high. To achieve the best results use stock at least 5 inches high. 1/2" Shanks
In stock
+

Crown Molding Router Bits

16320
$69.95  
Add an elegant touch to many projects and areas with these beautiful crown molding profiles. Also included in this set is a crown molding extender. Combine the extender with itself or with either of the included crown molding bits to double the height of the moldings up to 4-3/4" high. Due to the large size of these cutters, be sure to make multiple passes to achieve full profile depth. Two flute carbide cutters and 1/2" shanks. Set comes in a solid wood storage case.
In stock
+

16147
$24.95  
This beautiful profile will cut very large 2-1/2" crown moldings while saving you a fortune. Combine with our crown molding extender to really stretch your possibilities. Use your imagination... Due to the large size of this cutter, be sure to make multiple passes to achieve full profile depth. Blades are 2 flute, premium K10 carbide and shank is 1/2".
In stock
+

16153
$24.95  
Cut detailed crown moldings with this elegant profile. Combine with our crown molding extender to really stretch your possibilities. Use your imagination… Due to the large size of this cutter, be sure to make multiple passes to achieve full profile depth. 2 flute carbide cutters and 1/2" shank.
In stock
+

16148
$23.95  
Cut beautiful crown moldings with this elaborate Router bit profile. Combine with our crown molding extender to really stretch your possibilities. Use your imagination... Due to the large size of this cutter, be sure to make multiple passes to achieve full profile depth. Blades are 2 flute, premium K10 carbide and shank is 1/2".
In stock
+

16146
$23.95  
This beautiful profile will allow you to cut large 2-1/4" crown moldings while saving you a fortune. Combine with our crown molding extender to really stretch your possibilities. Use your imagination... Due to the large size of this cutter, be sure to make multiple passes to achieve full profile depth. Blades are 2 flute premium K10 carbide and shank is 1/2".
In stock
+

16152
$22.95  
Cut beautiful crown moldings with this classic profile. Combine with our crown molding extender to really stretch your possibilities. Use your imagination... Due to the large size of this cutter, be sure to make multiple passes to achieve full profile depth. 2 flute carbide cutters and 1/2" shank.
In stock
+

Reversible Crown Molding Router Bits

16249
$49.95  
The Yonico 16249 reversible crown molding Router bit set can create 3 different crown moldings using your choice of bit combinations. Choose one profile for the bottom of the crown then flip the stock and repeat or swap the bit to create a more elaborate profile. Fence depth adjustments are not necessary as both bits have the same top edge width. (Minor sanding might be required.) Any combination of profiles you choose can create a crown greater than 6" high. To achieve the best results use stock at least 5 inches high. 1/2" Shanks
In stock
+

16151
$25.95  
The Yonico 16151 reversible crown molding Router bit can create crown moldings greater than 6" high by flipping the stock after the first pass and making a second pass joining the two profiles in the center. 1/2" Shank
In stock
+

16149
$25.95  
The Yonico 16149 reversible crown molding Router bit can create crown moldings greater than 6" high by flipping the stock after the first pass and making a second pass joining the two profiles in the center. 1/2" Shank
In stock
+

16150
$24.95  
Unique in its design, this crown molding bit will allow you to create simpler single run crown moldings as well as more elaborate double run crown moldings. Simply flip the wood after the first run and make a second run using the same bit or any other molding or profile bit. Its versatility is limited only by your imagination. Large profiles such as these require multiple passes to cut the full profile depth. Two flute carbide cutters with a fully enclosed bearing. Shank is ½".
In stock
+

16142
$22.95  
Crown Molding Extender Router Bit will cut very large custom crown moldings. You can also double the height of your crown molding to 4-1/2" by flipping the stock after finishing the first cut, then running again. Additionally, the extender bit can be combined with any of our other crown molding bits to create your own custom design crown moldings up to 4-3/4" high. Due to the large size of this cutter, be sure to make multiple passes to achieve full profile depth. Blades are double fluted and made of premium k10 carbide. Shank is 1/2".
In stock
+

Crown Cap Molding Router Bits

16212
$38.95  
A unique approach to creating your own crown moldings. First cap both edges of the stock with the design profile bit then add a cove to the center of the stock using the horizontal cove bit. This set is very versatile as it can be used on a wide range of stock sizes. 1/2" shanks.
In stock
+

16214
$38.95  
A unique approach to creating your own crown moldings. First cap both edges of the stock with the design profile bit then add a cove to the center of the stock using the horizontal cove bit. This set is very versatile as it can be used on a wide range of stock sizes. 1/2" shanks.
In stock
+

16112
$18.95  
This base cap and crown cap molding bit has a cutting height of 1-5/16" and cutting depth of 3/8". This bit is used to add a cap to base moldings and can also be paired with a horizontal cove Router bit to create large crown moldings. 1/2" shank.
In stock
+

16114
$18.95  
This base cap and crown cap molding bit has a cutting height of 1-5/16" and cutting depth of 1/4". This bit is used to add a cap to base moldings and can also be paired with a horizontal cove Router bit to create large crown moldings. 1/2" shank.
In stock
+

16111
$16.95  
This base cap and crown cap molding bit has a cutting height of 13/16" and cutting depth of 3/16". This bit is used to add a cap to base moldings and can also be paired with a horizontal cove router bit to create large crown moldings. 1/2" shank.
In stock
+

16113
$16.95  
This base cap and crown cap molding bit has a cutting height of 27/32" and cutting depth of 1/8". This bit is used to add a cap to base moldings and can also be paired with a horizontal cove router bit to create large crown moldings. 1/2" shank.
In stock
+

Horizontal Crown Molding Router Bit

16185
$25.95  
3"
This bowl and horizontal crown bit features a radius and cutting diameter of 3" with a total cutting depth of 11/16". The shank is 1/2" in diameter.
In stock
+

16172
$21.95  
2.7"
Use the Yonico 16172 Router bit to create a 2.7" radius concave bowl or crater-like indents at 2-3/4" diameter across and 3/8" deep. May be plunged deeper to create side walls or shallower for a smaller diameter. Blades meet in the center allowing true vertical plunging. CNC compatible. 1/16" thick carbide.
In stock
+

16171
$16.95  
2.22"
Use the Yonico 16171 Router bit to create a 2.22" radius concave bowl or crater-like indents at 2-15/32" diameter across and 3/8" deep. May be plunged deeper to create side walls or shallower for a smaller diameter. Blades meet in the center allowing true vertical plunging. CNC compatible. 1/16" thick carbide. 1/2" Shank.
In stock
+

16182
$14.95  
2-1/4"
This bowl and horizontal crown bit features a radius and cutting diameter of 2-1/4" with a total cutting depth of 9/16". The shank is 1/2" in diameter.
In stock
+

16181
$12.95  
2"
This bowl and horizontal crown bit features a radius and cutting diameter of 2" with a total cutting depth of 33/64". The shank is 1/2" in diameter.
In stock
+

16170
$11.95  
1.65"
Use the Yonico 16170 Router bit to create a 1.65" radius concave bowl or crater-like indents at 1-3/4" diameter across and 1/4" deep. May be plunged deeper to create side walls or shallower for a smaller diameter. Blades meet in the center allowing true vertical plunging. CNC compatible. 1/16" thick carbide.

16170q
$11.95  
1-1/2"
Use the Yonico 16170q Router bit to create a 1-1/2" radius concave bowl or crater-like indents at 1-3/4" diameter across and 7/32" deep plus 1/8" fillet.
In stock
+

16173q
$11.95  
1"
This bowl and horizontal crown bit features a radius and cutting diameter of 1" with a total cutting depth of 3/8". The shank is 1/4" in diameter.
In stock
+

16175
$11.95  
1-1/4"
This bowl and horizontal crown bit features a radius and cutting diameter of 1-1/4" with a total cutting depth of 3/8". The shank is 1/2" in diameter.
In stock
+

16173
$11.95  
1"
This bowl and horizontal crown bit features a radius and cutting diameter of 1" with a total cutting depth of 3/8". The shank is 1/2" in diameter.
In stock
+

Crown Molding Miter Router Bit

16143
$24.95  
Cut 52°/38° back angles on crown moldings and cornices with the Yonico 16143 Crown Molding Router Bit. As an alternative to 45° installation, 52°/38° angles enables moldings and cornices to be installed at the tilt with the most eye appeal. While high ceiling crown moldings will show best when angled downward, a crown molding installed on a low ceiling or a cornice installation will look best when angled upwards. For higher ceilings, route the ceiling edge with the stock face up, then flip over and route the wall edge face down. For lower ceilings, route the wall edge with the stock face up, then flip over and route the ceiling edge face down. Note: Be sure to cut angles before routing the actual molding profile to enable precise angle cuts. Two flute carbide cutters with ball bearing guide. Largest diameter is 2-3/8" and cutter height is 1-9/16". Shank is 1/2".
In stock
+